These elements are supplied open and ready to be sticked. 

Their preparation is very easy. First of all, clean the remaining dust on the profiling with a brush. Moisten the profiling with a wet brush and stick with a special resin endowed with a spout. Assemble the element wrapping it with adhesive paper. Clean the remaining resin and let harden for at least 2 hours. 

The assembled element must be installed on metal structures and fixed with screws. 

The treatment of plastering of the junctions is performed as in normal ceiling.

                                                                                              

              

          

                      ONESTEP PROFILGIPS ml. 3,00 

CODE	DESCRIPTION	LENGHT
AN 1010	step cm. 10x10	ml. 3,00
AN 2020	step cm. 20x20	ml. 3,00
AN 3030	step cm. 30x30	ml. 3,00
AN 3010	step cm. 30x10	ml. 3,00

 

                        

                           OPENTOP ml. 3,00 

CODE	DESCRIPTION	LENGHT
TOP 40 - 75	element "U" cm. 4x7,5x4	ml. 3,00
TOP 40 - 100	element "U" cm. 4x10x4	ml. 3,00
TOP 100 - 100	element "U" cm. 10x10x10	ml. 3,00
TOP 150 - 150	element "U" cm.15x15x15	ml. 3,00
TOP 200 - 200	element "U" cm.20x20x20	ml. 3,00

                   

                              

 

 

     

 

                 TWO-STEPS PROFILGIPS ml. 3,00 

CODE	DESCRIPTION	LENGHT
SCA 20505	2 steps cm. 5x5	ml. 3,00
SCA 21005	2 steps cm.10x5	ml. 3,00
SCA 21008	2 steps cm. 10x8	ml. 3,00
SCA 21010	2 steps cm. 10x10	ml. 3,00
SCA 20808	2 steps cm. 8x8	ml. 3,00

 

               THREE-STEPS PROFILGIPS ml. 3,00 

CODE	DESCRIPTION	LENGHT
SCA 30505	3 steps cm. 5x5	ml. 3,00
SCA 31005	3 steps cm. 10x5	ml. 3,00
SCA 31008	3 steps cm. 10x8	ml. 3,00
SCA 31010	3 steps cm. 10x10	ml. 3,00
SCA 30808	3 steps cm. 8x8	ml. 3,00